Travel(Stroke)
1040 - 600 mm
Max Spindle Speed
12000 - 8000 rpm
Feedrate(Rapid Traverse)
0040*40*36 mm
Power Consumption
60 KvA
PRODUCT DATA
TECHNICAL SPECIFICATIONS & FEATURES
DN Solutions Vertical Machining Center DMP Series review the machine’s core engineering highlights.
DMP Series
| Specifications | Description | Unit | DMP 500-2SP | DMP 570/50-2SP |
|---|---|---|---|---|
| Travel(Stroke) | X-axis | mm (inch) | 1040 (40.9) | 600 (23.6) |
| Y-axis | mm (inch) | 520 (20.5) | 570 + 142(gantry ready) (22.4 + 5.6) | |
| Z-axis | mm (inch) | 600 (23.6) | Z1 : 625 (24.6) Z2 : 625 (24.6) | |
| Distance between spindles | mm (inch) | 400 (15.7) | 500 (19.7) | |
| Feedrate(Rapid Traverse) | X axis | m/min (ipm) | 40 (1574.8) | 40 (1574.8) |
| Y axis | m/min (ipm) | 40 (1574.8) | 40 (1574.8) | |
| Z axis | m/min (ipm) | 36 (1417.3) | 36 (1417.3) | |
| Table | Table size | mm (inch) | 1200 x 520 (47.2 x 20.5) | 1500 x 570 (59.1 x 22.4) |
| Max. Load | kg (lb) | 800 (1763.7) | 1100 (2425.0) | |
| Table type | T-SLOT (4-125 (4.9) x 18 (0.7) H7) | T-SLOT (4-125 (4.9) x 18 (0.7) H8) | ||
| Spindle | Max spindle speed | r/min | 12000 {8000}* | 8000 |
| Spindle taper | ISO #40 | ISO #50 | ||
| Max. torque | N·m (ft-lb) | 117.8 {286}* (86.9 {211.1}) | 286 (211.1) | |
| Automatic Tool Changer (ATC) | Max diameter | Continous mm (inch) | 90 {80, 75}* (3.5 {3.1, 3.0}) | 125 (4.9) |
| Without Adjacent Tools mm (inch) | 150 (5.9) | 220 (8.7) | ||
| Capacity | ea | 2-24 {2-30, 2-40}* | 2-24 | |
| Power consumption | kVA | 60 | 60 | |
| Machine size | Height | mm (inch) | 3510 (138.2) | 3680 (144.9) |
| Length | mm (inch) | 2400 (94.5) | 2400 (94.5) | |
| Width | mm (inch) | 2760 (108.7) | 3200 (126.0) | |
| Machine Weight | kg (lb) | 8500 (18739.0) | 13000 (28659.7) |
*The specifications and information above-mentioned may be changed without prior notice. For more details, please contact ELECTRONICA.
01
Designed as a highly stable, rigid structure, the DMP-2SP is suitable for mass production in small variety items. In addition, W-axis for DMP 500-2SP, Z2 aixs for DMP 570/50-2SP been adopted as a standard feature to djust tool length both spindle easily.
02
Direct-coupled type spindles have been adopted as a standard feature to further reduce vibration and noise while enhancing productivity, work environment and machining accuracy.
03
Designed as a stable, highly rigid structure, the DMP-2SP series is suitable for mass production of small variety parts.
04
W-axis for DMP 500-2SP, Z2 aixs for DMP 570/50-2SP can reduce tool setting time easily.
05
The customer can reduce the base machine cost compared to two conventional VMC’s.
06
Additionally, for ancillary items such as spindle probe, mist collector etc, only one is required,thereby reducing the total investment cost.
07
The DMP-2SP production rate is faster than conventional VMC’s, and also floorspace is greatly reduced.